Previous arrow
Next arrow

The AT&T MicroCell acts like a mini cellular tower, boosting cellular performance in your home or small business.

Who pays your wireless bill? If you do, select Personal Account. If your company does, pick Business Account. You'll need your AT&T wireless phone number or username, along with your password.

Don't worry if you haven't already set up your AT&T online wireless acount. Select the appropriate account type below and follow the step-by-step instructions for account setup.

MicroCell makes it easy to add or delete users, change your service
address, and add multiple MicroCells to your account.

Just select your account type below. Choose Personal Account if you pay for your wireless bill or Business Account if your company does.

You'll need your AT&T wireless phone number or username, along with your password.

The ATRIX 4G Experience Specifications Image Gallery

Experience strong network performance right in your home. Get more bars in areas where some users could experience a weaker signal due to home construction or geography.

View Feature Overview video

The MicroCell means never worrying about missed business calls. Plus, adding Unlimited MicroCell Calling gives you extra peace of mind. Control costs and still talk as long as you want inside the office.

Pricing is available through your AT&T
representative or Premier.

Add the Unlimited MicroCell Calling feature and your whole family can enjoy unlimited domestic calling.

Start calls on your MicroCell and continue them on the go without using up minutes!

Complete specifications

Supported Devices

Supports voice and 3G data
Supports voice and data
AT&T 3G, 4G, or 4G LTE wireless handsets
Postpaid wireless plan from AT&T
Up to 4 phones can be used simultaneously

Internet Connection

Broadband connection such as
AT&T U-Verse ®, DSL, or cable required. Not compatible with satellite broadband.

Recommended Internet Speed: Minimum speed is 1.5Mbps download and 256Kbps upload. Recommend 3Mbps download and 384Kbps upload for heavy data users. Check your Internet speed.


100-120 VAC, 15 W; 12 VDC,
1.25 A Output


Power, Ethernet, GPS, Computer, 3G


8.5 in. x 6.3 in. x 1.5 in. (at top), 4 in. (at legs)


1 lb 2 oz. (AC power adapter not included)


Install device in a sheltered location with a temperature range of 0 degrees to 38 degrees Celsius (32 degrees to 100 degrees Fahrenheit).


Installing near a window is strongly recommended to ensure access to Global Positioning System (GPS). A GPS link is needed to verify the device location during initial startup.

MicroCell unit may be moved if new location is within an AT&T authorized service area and properly registered online.

Calls transfer out, but do not transfer in. Calls transfer from the AT&T MicroCell to the strongest available AT&T tower signal. Calls connected on the cell tower do not transfer to the MicroCell.

Firewall Specifications System Administrators (Business Customers):Installing the MicroCell behind a firewall, or behind a router with firewall capabilities, requires the following ports be opened to prevent the firewall from blocking communication with the network. This type of installation is typically found in corporate environments.

123/UDP:NTP timing (NTP traffic)

443/TCP:Https over TLS/SSL for provisioning and management traffic

4500/UDP:IPSec NAT Traversal (for all signaling, data, voice traffic)

500/UDP:IPSec Phase 1 prior to NAT detection (after NAT detection, 4500/UDP is used)

4500/UDP:After NAT detection, 4500/UDP is used

MicroCell works with most broadband service providers, including AT&T broadband.

For best performance, minimum speeds of 1.5Mbps downstream and 256Kbps upstream are recommended.

Satellite and wireless broadband are not compatible.

Improved coverage –Get more bars for voice and data in your home or office.

No monthly fees –Use the minutes and data from your existing wireless plan.

Increased security –You control who accesses your MicroCell.

Simple management –Device settings are online and at your fingertips.

*Wi-Fi is the optimal solution for home mobile data use, and doesn't count against your mobile data usage bucket. Visit for tips on setting up and using Wi-Fi. When using 3G data services through your MicroCell instead of Wi-Fi, standard data rates apply. MicroCell operation requires an AT&T 3G or 4G wireless device and Internet access service of at least 1.5Mbps downstream/256Kbps upstream. Device not compatible with satellite broadband services. Not intended for sale or use in homes or areas with strong wireless signal strength. Strong wireless signal strength may adversely affect MicroCell performance. For use with AT&T wireless devices only; not compatible with other wireless systems. Usage generated by MicroCell counts toward your wireless data usage plan limit and may be subject to applicable charges from your ISP. The maximum coverage of the AT&T MicroCell is approximately 40 feet. Actual coverage will be limited by the density of obstructions. Calls will transfer to a cell tower if you leave the MicroCell coverage area, but calls may drop if you return to the MicroCell coverage area. See AT&T MicroCell Service Agreement/Terms and Conditions for a full list of terms and conditions.