This tutorial shows how to assemble the device.
  1. Remove the Battery cover by pulling away at the notch.

    device 2717/1332707.jpg

  2. To insert the SIM card, open the SIM port cover.

    device 2717/1332708.jpg

  3. Insert the Mini SIM with the metal contacts facing down and the beveled edge facing left.

    device 2717/1332709.jpg

  4. Close the SIM port cover.

    device 2717/1332711.jpg

  5. To insert an optional SD card, open the SD port cover.

    device 2717/1332712.jpg

  6. Insert the Micro SD card into the SD port with the metal contacts facing down and the beveled edge facing left.

    device 2717/1332713.jpg

  7. Close the SD port cover.

    device 2717/1332727.jpg

  8. To insert the battery, with the metal contacts aligned, insert the Battery into the Battery port.

    device 2717/1332733.jpg

  9. Place the Battery cover back on the device, then press firmly around the edges to secure.

    device 2717/1332737.jpg

  10. When no SIM card is in the device, No SIM will be displayed on the home screen.
    Note: GoPhone Users: Your device will have a different home screen showing ‘To check your data balance, go to att.com/mygophone

    device 2717/1336741.jpg


Was this guide helpful?