Block and unblock devices from connecting to your Router's Wi-Fi network.
  1. BLOCK A DEVICE: From your device's web browser, go to http://attwifimanager. Enter your Username and Password, then click SIGN IN.
    Note: Ensure that your device is connected to the Netgear Nighthawk's Wi-Fi network. For more information, please see the Connect Devices to Wi-Fi or Connect PC or Mac to Wi-Fi tutorials.

    device 5189/9006412_01.jpg

  2. Click SETTINGS at the top of the page.

    device 5189/9006412_02.jpg

  3. Click Security, then click Access Controls.

    device 5189/9006412_03.jpg

  4. Select the Enable checkbox.

    device 5189/9006412_04.jpg

  5. Ensure that BlackList is selected under Filter Type.

    device 5189/9006412_05.jpg

  6. Click ADD under BLOCKED DEVICES.

    device 5189/9006412_06.jpg

  7. Enter the device's Name and MAC Address. Click ADD.
    Note: To add a device that is currently connected to the network, click the Add icon then click the desired device.

    device 5189/9006412_07.jpg

  8. Click Apply when finished.

    device 5189/9006412_08.jpg

  9. UNBLOCK A DEVICE: From the Access Controls screen, click the checkbox next to the desired device then click DELETE.

    device 5189/9006412_09.jpg

  10. Click Apply when finished.

    device 5189/9006412_10.jpg


Was this info helpful?