These codes mean you haven’t completed your registration. Here's how to finish:
Open your smartphone and turn off Wi-Fi to connect to cellular data.
Sign in to the AT&T Smart Home Manager app and complete AT&T the Internet Air installation. Don't have the app yet? Get it now
FYI: You can also check your order confirmation email and select Check your order status and view or accept your Terms of Service.
This code means there's an issue preventing your All-Fi Hub® from activating. Wait a little bit and then try your activation again.
Complete your registration: Sign in to the AT&T Smart Home Manager app and complete the AT&T Internet Air installation. Don't have the app yet? Get it now
Restart your All-Fi Hub: Unplug the power cord from your hub and the wall. Wait 20 seconds, then plug it back in. The restart may take up to five minutes.
Restart your All-Fi Hub: Unplug the power cord from your hub and the wall. Wait 20 seconds, then plug it back in. The restart may take up to 5 minutes.
Reset your hub to factory settings: Press the red reset button for 15 seconds. The reset may take up to 10 minutes.
The E005 error code means there's a power on self-test (POST) failure and your hub can’t start up.
Try these options to fix the issue:
Power: Check the power outlet the hub is plugged into. Make sure it works.
Restart your All-Fi Hub: Unplug the power cord from your hub and the wall. Wait 20 seconds, then plug it back in. The restart may take up to 5 minutes.
Reset your hub to factory settings: Press the red reset button for 20 seconds. The reset may take up to 10 minutes.
Code meaning
E008: Hub is overheating and shutting down
E009: Hub is too hot
E010: Hub is too cold
Steps to fix
Make sure your All-Fi Hub is in the best location. It should be:
On a hard, flat surface, away from direct sunlight
In a well-ventilated area with clearance for airflow
Restart your hub: Unplug the power cord from your hub and the wall. Wait 20 seconds, then plug it back in. The restart may take up to 5 minutes.
This error means an Ethernet cable isn’t connected. Check your cables and make sure the Ethernet cable is plugged in to the ONT and to your All-Fi Hub.
This error means there’s an issue with your eSIM profile. Try these options:
Restart your All-Fi Hub: Unplug the power cord from your hub and the wall. Wait 20 seconds, then plug it back in. The restart may take up to 5 minutes.
Reset your hub to factory settings: Press the red reset button for 20 seconds. The reset may take up to 10 minutes.
Contact us: We’ll help you get things working. Give us a call
This error means there was an authentication failure with the 5G or LTE network. Try these tips:
Restart your All-Fi Hub: Unplug the power cord from your hub and the wall. Wait 20 seconds, then plug it back in. The restart may take up to 5 minutes.
Check hub location: The hub should be on the highest level of your building, by a window but out of direct sunlight.
Use the Smart Home Manager app: We'll help you troubleshoot. Don't have the app yet? Get it now