Showing Content for | Change your ZIP Code

Enter another ZIP to see info from a different area. X | `>`

!We can't find that ZIP Code. Try again.

Connect your DIRECTV receiver to an HDTV

Learn how to connect a receiver to a high-definition TV (HDTV).


You’re viewing instructions for

TV type

High Definition (HD)

KM1010001-slctrgrp_highdefinitionhd

Quick answer
FREQUENTLY ASKED QUESTIONS

How do I connect my DIRECTV to a High Definition TV with an HDMI cable?

How do I connect my DIRECTV to a TV with an RCA component cable?

DETAILED STEPS

HDTV connection options

You can connect your receiver to an HDTV using an HDMI cable or green, blue, and red RCA component cable. If you have red, yellow, and white RCA cables or coaxial connections, learn how to connect your DIRECTV receiver to an HDTV.

Connect with an HDMI cable (recommended)

This option supports high-definition video and Dolby Digital audio.
  1. Plug one end of the cable into the HDMI port on the back of your receiver.
  2. Plug the other end of the cable into the HDMI port on your TV.
  3. Make sure you have selected the correct TV input source (example HDMI 1, HDMI 2).
  4. Set your TV resolution to 1080i or 720p.

Connect with an RCA component cable

If you use this option for high-definition video and audio, you’ll need two separate RCA-type cables.
  1. For video, plug the green, blue, and red ends of cable 1 into the matching green, blue, and red output ports on the back of the receiver.
  2. Plug the other ends of the cable into the corresponding input ports on your TV. 
  3. For audio, plug the red and white ends of cable 2 into the matching red and white output ports on the back of the receiver.
  4. Plug the other red and white ends of the cable into the matching input ports on the TV. (You won’t use the yellow end.)
  5. Make sure you selected the correct TV input source.
  6. Set your TV resolution to 1080i or 720p.
Last updated: May 17, 2021

Did you get the help you needed?

Great! We're so glad we could help.

We're sorry that didn't solve your issue.

Thanks for your feedback!


loading...