1. Home
  2. Support
  3. DSL

Update your DSL network password – Pace 4111

Your Digital Subscriber Line (DSL) network password is system generated and is used by the modem or router to authenticate and connect to the DSL network.

You’re viewing instructions for

Internet equipment

Pace 4111N

Pace

4111N

KM1047400-slctrgrp_pac4111n

Network password update

Note: The network password is stored in your modem or router and should not be modified unless you are instructed to do so by an AT&T technician.
  1. Go to your gateway settings.
  2. Select Settings > Broadband > Link Configuration.
  3. In the PPP Authentication and Settings section, verify your User ID is correct. If it isn’t, enter the correct User ID.
  4. Enter your DSL Network Password in the Password field.
  5. Enter your DSL Network Password in the Confirm Password field. PPP Authentication and Settings follows the Connection Type section
  6. Select Save.
Last updated: December 7, 2022

Browse topics

Connections, browsing & security
Installation & order status
Troubleshooting & repair
Learn about DSL internet and Wi-Fi connections, tools, and security.

Did you get the help you needed?