Add a battery or wired Google Nest Doorbell to your AT&T Connected life system with the Connected Life app and a Google Home account.
After you set up your Connected Life system, add your Nest Doorbell in the Connected Life app.
Open the Connected Life app.
Tap +, then Add device.
Select Google devices.
Scan the QR setup code on the back of your doorbell, then tap Next.
Follow the app steps to install and set up your doorbell.
Your Connected Life service comes with a Google Home Premium subscription. You'll be asked to:
Apply Google Home Premium to your Connected Life home
Set up the Google Home Premium features you want
Set permissions to access your Nest cameras and doorbells in the Connected Life app
Note: If you don’t finish setup for your Nest Doorbell and Google Home Premium, you may not be able to see or manage your Google Nest device in Connected Life.
Install Google Nest Doorbell (battery), wire-free installation
Charge the doorbell
First, use the included USB cable to fully charge your battery-powered doorbell for wire-free installation. Keep it plugged in during setup so it can connect to the app and your Wi-Fi network.
The status light will pulse white when your doorbell is charging and turn solid white when it's completely charged.
Install the doorbell
Check that you have all the parts included in the box, including:
Timbre Nest (con batería)
Wall plate
Wedge
Wire extenders (you won't need these for wire-free installation.)
Screws
Wall anchors
Spacers
Unlock tool
USB-C to USB-A charging cable
The Nest Doorbell (battery) comes with a wedge you can use to adjust the doorbell's camera angle if it's located in a corner. This wedge can angle your doorbell horizontally up to 20°. If your doorbell needs a wider angle, or you need to adjust the angle vertically, you can purchase a Made for Google doorbell wedge.
Herramientas
Phillips screwdriver
Power drill
Phillips drill bit
1/4 in (6.5 mm) drill bit (for wall anchors)
3/32 in (2 mm) drill bit (optional, to drill into hard materials like brick and stucco)
Bubble level (to check doorbell alignment)
Use your battery-powered doorbell
Learn more about Nest doorbell basics, how to change settings, and more in Get started using your Nest doorbell.
Install Google Nest Doorbell (wired, 3rd gen), wired installation
1. Check compatibility and power requirements
Ensure your existing doorbell system is compatible with Nest Doorbell. The Nest Doorbell (wired, 3rd gen) requires a transformer rated 16–24VAC, 10–40VA, 50–60 Hz. If your transformer doesn’t meet these specs, you may need to upgrade your transformer to meet the doorbell's higher power requirements.
2. Gather tools and parts
Check that you have all the parts included in the box, including:
Timbre Nest (con cable, 3.ª gen.)
Chime connector
Base plate
20o Wedge
Wire connector
Hex key
Wall screws and anchors plus extra security screw
Calcomanía para ventanas
Spacers
Quick start guide, safety/warranty documents.
Have these tools on hand:
#2 Phillips screwdriver
Power drill with Phillips drill bit
1/4 in (6 mm) drill bit (optional, to drill into hard materials like brick and stucco)
3/32 in (2 mm) drill bit (optional, to drill pilot holes into wood or siding for attachment screws)
Bubble level (to check doorbell alignment)
3. Turn off power
Switch off the doorbell and chime at your home's breaker or fuse box. Confirm by ringing the doorbell to ensure no power
4. Remove the old doorbell
Detach the old button from the base plate.
Disconnect the wires and tape or bend them so they don’t slip back into the wall
5. Install the chime connector (if needed)
Attach the chime connector to the base plate.
Connect it to your existing chime system YouTube.
6. Mount the base plate
Use the included wall screws and anchors.
Position the base plate so the camera is at the optimal height and angle.
If in a corner, use the wedge to angle the camera up to 20°.
7. Connect the wires
Connect the existing doorbell wires to the terminals on the back of the Nest Doorbell.
Ensure all connections are secure.
8. Attach the doorbell
Snap the doorbell onto the base plate.
Secure with the provided screws.
9. Restore power
Turn the power back on at the breaker. Test the doorbell to ensure it rings and the chime works. Manuals+.
10. Set up in the Connected Life and Google Home apps
11. Final checks
Verify the camera angle and field of view.
Test two-way talk and video quality.
Review the status lights in the app to confirm all systems are online.
Use your wired doorbell
Learn more about Nest doorbell basics, how to change settings, and more in Get started using your Nest doorbell.
Expert setup
Don't want to tackle it yourself? Contact our installation partner, OnTech, to arrange for a professional to set up your Nest Doorbell for you for an added cost.
OnTech: 888-252-5629