MicroCell requirements
Which device do you want help with?

MicroCell requirements

This tutorial walks through the MicroCell requirements.

INSTRUCTIONS & INFO
  1. To use the AT&T MicroCell, you will need:
    device 2832/1415249.jpg
  2. Fixed broadband internet service such as AT&T U-verse, DSL, fiber or cable.
    Note: Download speeds of a least 1.5Mbps and upload speeds of at least 256Kbps are required. Not compatible with satellite and wireless broadband.
    device 2832/1415250.jpg
  3. A dedicated Ethernet port available on your modem or router.
    device 2832/1415251.jpg
  4. Computer with Internet access to activate your device.
    device 2832/1415252.jpg
  5. Device must be able to access a Global Positioning System (GPS) signal to verify the device location.
    Note: Installation near a window is strongly recommended.
    device 2832/1415253.jpg
  6. AT&T 3G, 4G, or 4G LTE wireless handset.
    device 2832/1415254.jpg
  7. A myAT&T account is required for activation.
    Note: If you do not have a myAT&T account, you can register here.
    device 2832/1415255.jpg

Did you get the help you needed?