Which device do you want help with?


Turn Bluetooth on or off, scan and connect to other Bluetooth devices, and unpair a connected device.

  1. Swipe down from the top of the screen, then tap the Settings icon.
    device 5039/9006136_01.jpg
  2. Tap the Bluetooth switch to turn on and off. 
    Note: To optimize battery life, turn Bluetooth off when not in use.
    device 5039/9006136_02.jpg
  3. When Bluetooth is on, the Bluetooth icon will be displayed in the Notification bar.
    device 5039/9006136_03.jpg
  4. To connect to another Bluetooth device, tap Bluetooth.
    device 5039/9006136_04.jpg
  5. Tap the Desired device to pair.
    Note: If the desired device is not shown, make sure it is set to discoverable, then tap Scan for devices
    device 5039/9006136_05.jpg
  6. Tap PAIR.
    device 5039/9006136_06.jpg
  7. Device will move to “Paired devices” when successfully paired. When Bluetooth is paired, the Bluetooth paired icon will display in the Notification bar.
    Note: If prompted, enter the Bluetooth pass code for the connecting device. Check your user manual for the pass code or try 0000 or 1234.
    device 5039/9006136_07.jpg
  8. To adjust settings or unpair, tap the Settings icon.
    Note: If having trouble pairing/unpairing your device with your vehicle, please refer to your vehicle's user manual for additional information.
    device 5039/9006136_08.jpg
  9. Adjust Settings as desired. Tap Unpair to unpair the device.
    Note: For more information see Pair Bluetooth Accessory.
    device 5039/9006136_09.jpg

Did you get the help you needed?