Which device do you want help with?

Bluetooth

Turn Bluetooth on or off, scan and connect to other Bluetooth devices, and unpair a connected device.

INSTRUCTIONS & INFO
  1. ENABLE BLUETOOTH: Swipe down from the Notification bar, then select the Bluetooth icon.
    Note: To enable Bluetooth via settings, swipe down from the Notification bar with two fingers, then select the Settings icon > scroll to then select Bluetooth > Bluetooth switch ON.
    device 5225/9006136_01.jpg
  2. SCAN FOR DEVICES:  Swipe down from the Notification bar, then select and hold the Bluetooth icon. Select the Bluetooth switch.
    device 5225/9006136_02.jpg
  3. CONNECT TO A DEVICE: From the Bluetooth screen, slect Pair new device then select the desired device.
    Note: If the desired device is not shown, make sure it is set to discoverable.
    device 5225/9006136_03.jpg
  4. Select PAIR when prompted to request a pairing.
    Note: You may be prompted to enter a passcode (common default passcode is 0000).
    device 5225/9006136_04.jpg
  5. When connected, the Bluetooth connected icon will be displayed in the Notification bar.
    Note: To optimize battery life, turn Bluetooth off when not in use.
    device 5225/9006136_05.jpg
  6. ADJUST SETTINGS OR UNPAIR: Select the Settings icon.
    device 5225/9006136_06.jpg
  7. Adjust settings as desired, or select FORGET to unpair the device.
    Note: If having trouble pairing/unpairing your device with your vehicle, please refer to your vehicle's user manual for additional information.
    device 5225/9006136_07.jpg
  8. QUICKLY TURN BLUETOOTH ON OR OFF: Swipe down from the Notification bar, then select the Bluetooth icon.
    Note: For additional information on pairing, please see the Pair Bluetooth Accessory article.
    device 5225/9006136_08.jpg

Did you get the help you needed?