If you have already paired your Galaxy Watch and phone, but did not set up a cellular connection, see Activate your watch to set up your Galaxy Watch on the cellular network.
Press and hold the Power/Home button to turn on the watch. Note: The SIM card comes preinstalled and cannot be removed.
To connect your watch with your smartphone, the Galaxy Wearable app must be installed on your smartphone. If installed, swipe up or down on the home screen to access the Apps tray > Samsung folder > Galaxy Wearable app. Note: To install the Galaxy Wearable app, from the home screen select the Play Store app > search for Galaxy Wearable > INSTALL > ACCEPT > OPEN.
Select START THE JOURNEY, then follow the prompts to select your Gear. Note: Confirm that the smartphone has found the watch by comparing the number in parentheses with the number displayed on the watch. The device will begin to connect.
A Bluetooth passkeywill be displayed on the watch. Confirm that the passkeys match on the both devices. Select the Checkmark icon on the watch and select OK on the phone.
Review the End User License Agreement, then select the Agree circles as desired. Select NEXT.
If you have another device, you can copy content to your new device. Select the desired backup, then select RESTORE and follow the prompts to copy your content or select SKIP to continue without copying from an old device.
Select Use code to scan a QR code.
Point the camera at the QR code to scan it.
Select DONE, setup is now complete. You will need to set up NumberSync in order to make calls and send and receive text messages from your connected phone's number. Note: Numbersync allows you to make and receive calls and texts using your smartphone number, even when your phone is off or not with you.
SET UP NUMBERSYNC: When the device is connected to an AT&T Cellular Network, you will be prompted on install AT&T subscriber specific features. Review the prompt, then select INSTALL. Note: Your watch will restart.
From the clock screen press the Power/Home button then rotate the bezel to and select the Settingsicon.
Rotate the bezel to and select Connections, then rotate the bezel to and select AT&T NumberSync.
Select Get started, then select the Checkmark icon.
From your paired device, enter your AT&T User ID and Password then select Login.
You will receive a 5-digit code on the watch. Enter the 5-digit sync code from the watch > select the I accept the Terms & Conditions checkbox > Sync.
Your watch will be listed under Synced watches. Note: To unsync your watch, select the Onswitch.
When sync is complete, select DONE on the watch.
NumberSync is ready for use. When your Galaxy Watch is successfully synced with your mobile network, the network will be displayed in the Moments bar. Note: To turn NumberSync off, from the Galaxy Wearable app, scroll to and select Mobile networks then select Remove.