Bluetooth

Bluetooth

Turn Bluetooth on or off, scan and connect to other Bluetooth devices, and unpair a connected device.


INSTRUCTIONS & INFO
  1. ENABLE BLUETOOTH: Swipe down from the Notification bar, then select and hold the Bluetooth icon.
    Note: To enable Bluetooth via settings, swipe down from the Notification bar > select the Settings icon > scroll to then select Bluetooth > Bluetooth switch ON.
  2. SCAN FOR DEVICES: Select the Bluetooth switch.
    Note: The device will automatically scan for devices when Bluetooth is enabled.
  3. CONNECT TO A DEVICE: Select the desired device.
    Note: If the desired device is not shown, make sure it is set to discoverable then select the Menu icon > Refresh.
  4. Select PAIR when prompted to request a pairing.
    Note: You may be prompted to enter a passcode (common default passcode is 0000).
  5. When connected, the Bluetooth connected icon will be displayed in the Notification bar.
    Note: To optimize battery life, turn Bluetooth off when not in use.
  6. ADJUST SETTINGS OR UNPAIR: Select the Settings icon.
  7. Adjust settings as desired, or select FORGET to unpair the device.
    Note: If having trouble pairing/unpairing your device with your vehicle, please refer to your vehicle's user manual for additional information.
  8. QUICKLY TURN BLUETOOTH ON OR OFF: Swipe down from the Notification bar, then select the Bluetooth icon.
    Note: For additional information on pairing, please see the Pair Bluetooth Accessory article.

Did you get the help you needed?

Great! We're so glad we could help.

0/500

We're sorry that didn't solve your issue.

0/500

Thanks for your feedback!