Showing Content for | Change your ZIP Code

Enter another ZIP to see info from a different area. X | `>`

!We can't find that ZIP Code. Try again.


How to reset U-verse TV remote controls

Learn how to reset your U-verse TV remote and clear any programming.


DETAILED STEPS

Reset your remote by type and clear any programming

S10, Silver, and Point Anywhere remote controls

S10, Silver, and Point Anywhere remote controls

For the S10, Silver, and Point Anywhere remotes, follow these steps:   
  1. Press and hold the AT&T and the OK key simultaneously.   
  2. Release both keys and all four mode keys will flash twice to indicate you are in programming mode.   
  3. Enter programming code 900 by pressing the number keys on the remote control. The AT&T key will give a long flash, indicating the code was successfully entered and the remote has been reset to the default settings.

S20 and S30 Black remote controls

S20 black remote

The S20 and S30 remote controls are completely identical in functionality. The only difference is all of the buttons on the S30 model are backlit.

For the S20 and S30 remotes, follow these steps:
  1. Press and hold the Menu key and the OK key simultaneously.   
  2. Release both keys and your remote will flash twice to indicate programming mode.
  3. Enter programming code 981 by pressing the number keys on the remote control. The Power key will flash four times indicating the code was successfully entered and the remote has been reset to the default settings.

Did you get the help you needed?

Great! We're so glad we could help.

0/500
Cancel

We're sorry that didn't solve your issue.

0/500
Cancel

Thanks for your feedback!


Community forums

Have questions about your U-verse TV service? Explore our community forums for answers.