Connect to Laptop

Connect to Laptop

This article describes how to connect a laptop.


INSTRUCTIONS & INFO
  1. The AT&T Velocity USB Stick can be attached by inserting the USB end directly into an open USB port.
    Note: This device is compatible with Microsoft® WIndows® 7, 8, and 10, Mac® OS X® (10.5 and later), and Linux Ubuntu 32-bit 15.04, 15.10, 16.04, Fedora 32-bit 21, 22, 23. Installation may vary depending on your operating system.
    device 5152/9006540_01.jpg
  2. Optionally, you can extend the length of device connection from the computer with a USB extender (sold seperately). To connect with a USB cable, insert one end of the USB cable into the port at the base of the device.
    device 5152/9006540_02.jpg
  3. Insert the other end of the USB cable into an open port on the computer. The device will power on automatically.
    device 5152/9006540_03.jpg
  4. On the back of the device, the LED indicator will start blinking green when the device is powering up and searching for a network. The LED indicator will turn solid green when connected to the network.
    Note: For other color/status on the LED indicator, refer to the LED indicator topic page for details.
    device 5152/9006540_04.jpg

Did you get the help you needed?

Great! We're so glad we could help.

0/500

We're sorry that didn't solve your issue.

0/500

Thanks for your feedback!