Ensamblaje del teléfono
¿Con qué dispositivo necesitas ayuda?

Ensamblaje del teléfono

Instalar y quitar la tarjeta SIM y la batería.


INSTRUCCIONES E INFORMACIÓN
  1. If a SIM is not in the device the Missing SIM Icon will display in the Status bar cuando el dispositivo esté encendido.
    device 5093/9006107_01.jpg
  2. The SIM Card tray is located under the back cover of the device. To remove the cover, insert your fingernail into the slot at the bottom right side of the cover and lift the back cover.
    device 5093/9006107_02.jpg
  3. Slide the locking flap in the direction of the arrow to unlock, and open the slot. Insert the new nano SIM card into the slot with the gold contacts facing down, making sure the cut-off corner is at the top right and then lower the flap of the SIM card slot. Slide the flap in the direction of the arrow to lock it.


    device 5093/9006107_03.jpg
  4. To insert a microSD memory card, slide the Tarjeta de memoria into the microSD card holder with the gold contacts facing down and the notched edge going in first. Gently push the card in until it snaps into place.


    Importante: SD cards are sold separately. Para prevenir el daño de datos, se recomienda desmontar la tarjeta de memoria antes de quitarla. To unmount your memory card, tap Settings > More > Almacenamiento > Unmount SD Card.
    device 5093/9006107_04.jpg
  5. Replace the Back cover, pushing down on both sides from top to bottom until it clicks into place.
    device 5093/9006107_05.jpg

¿Recibiste la ayuda que necesitabas?