Connect to AT&T Microcell
Which device do you want help with?

Connect to AT&T Microcell

Connect your device to the AT&T MicroCell.

INSTRUCTIONS & INFO
  1. To use your new AT&T 3G or 4G phone with an AT&T Microcell, it must be within signal range and added to the approved user list.
    Note: 2G and non-AT&T devices are not compatible with AT&T Microcell.
    device 5045/9007004_01.jpg
  2. To add a device to your approved user list, from the home screen of the device you set up as the AT&T Microcell's primary number, tap the Messages icon.
    Note: You can also add an approved user by logging in at http://www.att.com/microcell using your myAT&T account information.
    device 5045/9007004_02.jpg
  3. Tap the Compose icon to send a message to a new recipient.
    device 5045/9007004_03.jpg
  4. Enter the short code 6235 (MCEL) as the recipient of the text message.
    device 5045/9007004_04.jpg
  5. Enter ADD 5555555555 (your device phone number) in the message field.
    device 5045/9007004_05.jpg
  6. Tap SEND.
    Note: You will recive a confirmation text once Microcell has been successfully connected.
    device 5045/9007004_06.jpg
  7. When successfully connected, the cell phone will show AT&T MicroCell or AT&T M-Cell in the notification bar.
    Note: Depending on the signal strength of the AT&T cell tower, the time for your cell phone to switch to the MicroCell can vary. It may take seconds or up to five minutes.
    device 5045/9007004_07.jpg
  8. If you do not see AT&T MicroCell or AT&T M-Cell, turn your mobile device (not MicroCell) off, wait 10 seconds and then turn it back on.
    Note: Depending on the signal strength of the AT&T cell tower, the time for your cell phone to switch to the MicroCell can vary. It may take seconds or up to five minutes.
    device 5045/9007004_08.jpg

Did you get the help you needed?