Sounds & Alerts

Sounds & Alerts

Change volume settings, ringtones, and notification alerts.


INSTRUCTIONS & INFO
  1. ADJUST RING VOLUME: Press the Volume buttons located on the right side of the device to adjust the volume.
    device 5223/9007012_01.jpg
  2. ACTIVATE VIBRATE MODE: Press the Volume down button until the Vibrate mode icon appears. When Vibrate mode is active, the Vibrate mode icon will display in the Notification bar.
    device 5223/9007012_02.jpg
  3. ACTIVATE SILENT MODE: Press the Volume down button until the Silent mode icon appears. When Silent mode is active, the Silent mode icon will display in the Notification bar.
    device 5223/9007012_03.jpg
  4. ACCESS ADDITIONAL VOLUME SETTINGSSwipe down from the Notification bar, then select the Settings icon.
    device 5223/9007012_04.jpg
  5. Select Sound.
    device 5223/9007012_05.jpg
  6. CHANGE RINGTONE: Select Phone ringtoneSelect the desired ringtone, then select OK.
    Note: For steps to assign a ringtone to a contact, please see the Contacts tutorial.
    device 5223/9007012_06.jpg
  7. CHANGE NOTIFICATION ALERTS: From the Sound screen, select Default notification sound then select the desired option.
    Note: To block or unblock notifications from appearing when the device is locked, swipe down from the Notification bar > select the Settings icon > scroll to and select Notifications > Settings icon > On the lock screen > desired option.
    device 5223/9007012_07.jpg
  8. TURN ON/OFF DO NOT DISTURB MODE: Swipe down from the Notification bar, then select the Do not disturb icon.
    Note: Do not disturb mode mutes sounds and the screen will remain off for incoming calls and alerts, but not alarms. Swipe down from the Notification bar, then select the Do not disturb icon to turn Do not disturb off.
    device 5223/9007012_08.jpg
  9. When Do not disturb mode is active, the Do not disturb icon will appear in the Notification bar.
    device 5223/9007012_09.jpg

Did you get the help you needed?

Great! We're so glad we could help.

We're sorry that didn't solve your issue.

Thanks for your feedback!