Charge the Battery
Device Image

AT&T Trek 2 HD (K88)

Charge the Battery

Tips on charging your battery.


INSTRUCTIONS & INFO
  1. Use the original charger and battery to maintain optimal battery performance over the life of your device.
    Note: The battery comes partially charged. When new, a fully discharged battery requires approximately 60 minutes to charge to 50% and 2 hours and 40 minutes to charge to 100%. You can use the device while charging. Battery life and charge cycles vary by use and settings. Use the original charger and battery to maintain optimal battery performance over the life of your device. The device has an approximate Standby time of 10.5 days and Internet usage time of 10 hours.
    device 5168/9006100_01.jpg
  2. Insert the USB-C end of the USB-C cable into the USB-C port at the base of the device.
    device 5168/9006100_02.jpg
  3. Plug the charger into a wall outlet. If necessary, connect the USB cable to the charger. Alternatively, you can insert the USB end of the cable into a computer to charge.
    Note: Your device charges quicker using a power outlet than when connected to a laptop or other power source.
    device 5168/9006100_03.jpg
  4. When the device is charging, the Charging icon will be displayed in the Notification bar.
    Note: For information about extending your battery performance, see the Battery Life tutorial.
    device 5168/9006100_04.jpg

Did you get the help you needed?

Great! We're so glad we could help.

We're sorry that didn't solve your issue.

Thanks for your feedback!