In this tutorial, you will learn how to:

• Adjust tethering settings
• Turn off Wi-Fi when tethering
• Adjust USB port settings
• Turn USB tethering on or off from device
 
 
 

Insert the USB-C end of the USB-C cable into the USB-C port at the base of the device. Insert the USB end of the USB-C cable in the USB port on the computer.

Image 1



Adjust tethering settings

1. From your device's web browser, go to http://attwifimanager. Enter your Username and Password, then click SIGN IN.

Note: Ensure that your device is connected to the Netgear Nighthawk M6 Wi-Fi network. For more information, please see the Connect Devices to Wi-Fi or Connect PC or Mac to Wi-Fi tutorials.

Image 2

2. Click SETTINGS at the top of the page.

Image 3

3. Click Advanced, then click Mobile Router Setup.

Image 4



Turn off Wi-Fi when tethering

Click the Turn off WiFi when tethering checkbox.

Image 5



Adjust USB port settings

From the Mobile Router Setup screen, click the Use USB port for drop-down menu then click the desired option. Click Apply to save changes.

Note: Click Continue. The device will restart.

Image 6



Turn USB tethering on or off from device

1. From the device home screen, select Settings.

Image 7

2. Select More.

Image 8

3. Select USB Tethering.

Image 9

4. Select the USB Tethering switch to turn USB Tethering on or off.

Note: Select Continue. The device will restart. 

Image 10

5. Select the desired USB Tethering option. 

Note: Select Ok to confirm.

Image 11