Screen Sharing

• Connect devices to Wi-Fi
• Activate Screen Sharing
• Turn off Screen Sharing

In order to project your screen to another device, both devices need to be connected to the same Wi-Fi network.
 
1. Swipe down from the upper right corner of the screen, then select and hold the  Wi-Fi icon.
 
2. Select the Wi-Fi switch to turn Wi-Fi on, then select the desired Wi-Fi network.

Note: If necessary, enter the Password then select Connect. If you need further assistance connecting to Wi-Fi, visit the Wi-Fi tutorial.

1. Swipe down from the upper right corner of the screen, then select Smart View.

Note: If it is your first time accessing Smart View, review the Smart View prompt, then select Continue. Review the Smart View permissions prompt, then select Continue.


 
2. Select the desired device. Select the drop-down icon to select Full screen or Multi View as desired, then select Start now.

3. When Casting your screen, the  Cast icon will be displayed at the top of the Quick Settings screen.

From the home screen, select the  Smart View icon then select Disconnect.

Note: Alternately, you can turn off Screen projecting through Quick Settings. Swipe down from the upper right corner of the screen, then select Smart View. The device will disconnect.