Connect WPS Devices

Connect WPS Devices

Learn how to connect WPS devices.

In this tutorial, you will learn how to:

• Access WPS settings
• Use Push WPS button
• Use Device PIN

Access WPS settings

1. From your connected device's web browser, go to http://hotspot.webui. Enter your Login Password, then click Login.

Note: The admin password for the online WebUI is the last 8-digits of the IMEI code, which is printed on the device label (underneath the battery). IMEI code is also listed on the Device Details screen of your device. Ensure that your device is connected to the AT&T Turbo Hotspot 2's Wi-Fi network. For more information, please see the Connect Devices to Wi-Fi or Connect PC or Mac to Wi-Fi tutorials.

Image 1

2. Click the Wi-Fi drop-down menu on the left side of the screen, then click WPS.

Image 2

3. Click the Enable switch to enable/disable WPS.

Image 3

Use Push WPS button

1. To enable Push Button WPS setup, select Push WPS Button.
Image 4
2. On the WPS-enabled device, navigate to and select WPS Push Button. Follow the prompts to complete setup.
Image 6

Use Device PIN

1. On the WPS-enabled device, navigate to and select WPS Pin Entry. The Device PIN will appear.
Image 7

2. To enable Device PIN WPS setup, from the WebUI enter the PIN from the WPS-enabled device then click Submit

Image 8

Did you get the help you needed?

Great! We're so glad we could help.


We're sorry that didn't solve your issue.


Thanks for your feedback!