Update your DSL network password – 2Wire 2701
Your Digital Subscriber Line (DSL) network password is system generated and is used by the modem or router to authenticate and connect to the DSL network.
You’re viewing instructions for
Internet equipment
2Wire
2701 HG-B
KM1047374-slctrgrp_2w2701hgb
Network password update
Note: The network password is stored in your modem or router and should not be modified unless you are instructed to do so by an AT&T technician.
- Go to your gateway settings.
- Select Broadband Link > Advanced Settings.
- Verify your User ID is correct. If it isn’t, enter the correct User ID.
- Enter your DSL Network Password in the Password field.
- Enter your DSL Network Password in the Confirm Password field.
- Select Save.
Last updated: December 7, 2022