Enable Wi-Fi network security - Pace 5268

Setting a password for your Wi-Fi home network is a smart, easy way to protect your network from unwanted users. Your AT&T Wi-Fi gateway comes with the security On and set to WPA (Wired Equivalent Privacy) by default.  If you have changed the security to OFF, follow these steps to turn it back on.

With the Pace 5268, you may have multiple network names and passwords for each radio being used: 2.4GHz, 2.4GHz Guest, and 5.0GHz.  To maximize your Wi-Fi experience, it is recommended that you use the radios as follows:

• 2.4GHz – Mobile devices
• 2.4GHz Guest – Mobile devices for visitors that want to connect to your home network. The 2.4GHz radio is turned off by default.
• 5.0GHz – Desktops, Smart TVs and other stationary devices)

Enable Wi-Fi Security

1. Go to your gateway settings.
2. In Key Things to do Using Your Gateway, set Wi-Fi Interface and Wi-Fi Security to Enabled.
3. In the Authentication drop-down, select WPA-PSK and WPA2-PSK.
4. Select Use custom Wireless Network Key.
5. In the Key field, enter a new Wi-Fi password.  You can define a 64-bit or 128-bit encryption key.
   • For 64-bit encryption, enter a 10-digit password made up of numbers and letters a-f or A-F.
   • For 128-bit encryption, enter a 26-digit hexadecimal number made up of numbers and letters a-f or A-F.
6. Select Save.

Once you have successfully enabled or updated your Wi-Fi network security, you’ll need to connect all your Wi-Fi devices with the new password information.