Connect to AT&T Network

Connect to AT&T Network

This article describes how to connect to the AT&T Network.


INSTRUCTIONS & INFO
  1. Insert the USB connector of the AT&T Velocity USB Stick into an open port on the desired device.
    device 5152/9006685_01.jpg
  2. The operating system will detect the device and install the necessary drivers.
    device 5152/9006685_02.jpg
  3. The Internet Access icon in the Task Bar will change to show when the device is connected.
    device 5152/9006685_03.jpg
  4. Connection is complete when the LED indicator light is solid green.
    Note: If you are experiencing issues connecting to the AT&T network, verify the SIM is activated and you are within AT&T coverage areas.
    device 5152/9006685_04.jpg
  5. ACCESS MANAGEMENT WEBSITE: On the connecting device, launch an internet browser. In the address bar enter http://attusbmodem or http://192.168.1.1. Here you can view the signal strength and manage device settings.
    Note: For more information, see the Management Website tutorial.
    device 5152/9006685_05.jpg

Did you get the help you needed?

Great! We're so glad we could help.

0/500

We're sorry that didn't solve your issue.

0/500

Thanks for your feedback!