Re-locate AT&T MicroCell
Which device do you want help with?

Re-locate AT&T MicroCell

This tutorial shows how to re-locate the MicroCell.

INSTRUCTIONS & INFO
  1. Launch a web browser and visit www.att.com/MicroCell, then click Manage Settings.
    device 2831/1424141.jpg
  2. Click on your account type.
    device 2831/1446249.jpg
  3. Enter your myAT&T login information, then click Log in.
    device 2831/1446250.jpg
  4. Click the desired MicroCell account, then click Continue.
    device 2831/1446251.jpg
  5. Scroll to "Your MicroCell Device Location & E911 Information", then click Add a New 3G MicroCell Device Location.
    Note: The new location address must be in an area where AT&T is licensed to provide service.
    device 2831/1446252.jpg
  6. Enter the physical address where the MicroCell will be located and click Save.
    device 2831/1446255.jpg
  7. The screen will refresh. Scroll back down to the section titled "Your MicroCell Device Location and E911 Information".
    device 2831/1447734.jpg
  8. Locate the new address that was added and click activate location. Do NOT click activate location for the address until the MicroCell is physically located at that address.
    device 2831/1446257.jpg
  9. To remove a location, click delete next to the desired location.
    device 2831/1446258.jpg

Did you get the help you needed?