Which device do you want help with?

Bluetooth

Turn Bluetooth on or off, scan and connect to other Bluetooth devices, and unpair a connected device.

INSTRUCTIONS & INFO
  1. ENABLE BLUETOOTH: Swipe down from the Notification bar, then select the Settings icon. Select the Network tab, then select the Bluetooth switch.
    Note: To optimize battery life, turn Bluetooth off when not in use.
    device 5234/9006136_01.jpg
  2. SCAN FOR DEVICES: From the Network tab in Settings, select Bluetooth. Your device will automatically search for devices.
    device 5234/9006136_02.jpg
  3. CONNECT TO A DEVICE: Select the desired device.
    Note: If the desired device is not shown, make sure it is set to discoverable then select the Refresh icon.
    device 5234/9006136_03.jpg
  4. Select PAIR when prompted to request a pairing.
    Note: You may be prompted to enter a passcode (common default passcode is 0000).
    device 5234/9006136_04.jpg
  5. When connected, the Bluetooth connected icon will be displayed in the Notification bar.
    device 5234/9006136_05.jpg
  6. ADJUST SETTINGS OR UNPAIR: From the Bluetooth screen, select the Settings icon next to the desired paired device.
    device 5234/9006136_06.jpg
  7. Adjust settings as desired, or select Unpair to unpair the device.
    Note: If you're having trouble pairing/unpairing your device with your vehicle, please refer to your vehicle's user manual for additional information.
    device 5234/9006136_07.jpg
  8. QUICKLY TURN ON/OFF BLUETOOTH: Swipe down from the Notification bar, then select the Bluetooth icon.
    Note: For additional information on pairing, please see the Pair Bluetooth Accessory article.
    device 5234/9006136_08.jpg

Did you get the help you needed?